Approx Price:
₹175,000.00
Capacity: 500 Liters
Material of Construction: Stainless Steel 304/316 (Food Grade)
Tank Type: Vertical / Horizontal (Select depending on design)
Mixing Type: Agitator / Paddle / Ribbon / Homogenizer (depending on model)
Mixer Motor Power: Typically 1.5 – 3 HP
Speed: 30-150 RPM (Variable via VFD)
Tank Finish: Polished inside and outside (Ra ≤ 0.2 microns)
SS Mixing Tank 500 Ltr – Technical Specifications |
|
| Material | Stainless Steel (SS 304 or SS 316) |
| Tank Type | Vertical or Horizontal Orientation |
| Capacity | 500 Liters |
| Wall Thickness | 3 mm (Customizable based on requirements) |
| Inner Surface Finish | Mirror Polished (Ra ≤ 0.4 µm) |
| Outer Surface Finish | Matt Finish |
| Insulation | Optional (Wool Insulation, thickness: 50mm) |
| Lid Type | Hinged or Removable Lid with Gasket |
| Bottom Type | Conical / Flat (depending on application) |
| Mounting | Floor Mounted or Skid Mounted |
| Inlet/Outlet | Stainless Steel Valves (Tri-clamp or Threaded) |
| Drainage | Bottom Drain with Valve for easy emptying |
| Manhole Size | 300 mm (or custom size) |
| Working Pressure | 2-3 bar (Customizable based on design) |
| Temperature Range | 20°C to 150°C with Electrical Heater or Steam |
| Power Supply | 415V, 3 Phase, 50 Hz (Customizable to regional standards) |
| Motor Power | 1.5-3 HP (depending on agitator type and load) |
| Motor Type | TEFC (Totally Enclosed Fan Cooled) or Ex-Proof (for hazardous environments) |
| Spped Control | VFD (Variable Frequency Drive) for speed control |
| Overload Protection | Thermal Overload Protection |
| Agitator Type | Anchor, Propeller, Paddle, or Turbine (depending on application) |
| Agitator Material | Stainless Steel (SS 304 or SS 316) |
| Shaft Material | Stainless Steel (SS 304 or SS 316) |
| Motor Rating | 1.5-3 HP (depending on application and desired speed) |
| Agitation Speed | 30-150 RPM (Variable via VFD) |
| Shaft Length | Customizable to tank height |
| Seal Type | Mechanical Seal / Lip Seal |
| Mounting Type | Top or Side Mount (Customizable) |
| Tank Height | 1300 mm (Customizable depending on tank design) |
| Tank Diameter | 600 mm (Customizable based on capacity and design) |
| Agitator Shaft Length | 1000 mm (Customizable based on tank height) |
| Manhole Size | 300 mm (or custom size) |
| Overall Dimensions (L x W x H) | 800 mm x 800 mm x 1500 mm (Customizable) |
| Weight | Approx. 120-150 kg (depending on design and material) |
