Approx Price:
₹350,000.00
Capacity Range: 100 Liters, 250 Liters, 500 Liters, 750 Liters, 1000 Liters
Material of Construction (MOC): SS304 and SS316
Agitation Speed: 10 – 60 RPM (Anchor) / 100 – 1500 RPM (Propeller & High Shear) – adjustable
Motor Power: 0.5 HP / 1.0 HP / 2.0 HP / 3.0 HP/ 5.0 HP
Internal Finish: Mirror finish Ra ≤ 0.4 µm for cGMP compliance
External Finish: Matt finish / Mirror finish (optional)
Liquid Mixing Tank – Technical Specifications |
|
| Capacity Range | 100 Liters, 250 Liters, 500 Liters, 750 Liters, 1000 Liters |
| Tank Type | Cylindrical, Vertical, Jacketed/Non-Jacketed, Closed or Open Type (as per requirement) |
| Material of Construction (MOC) | – SS 304 (Food & General Applications)- SS 316 / SS 316L (Pharmaceutical & High-Corrosion Resistance Applications)- Other alloys on request |
| Surface Finish | Internal: Mirror finish Ra ≤ 0.4 µm for cGMP complianceExternal: Matt finish / Mirror finish (optional) |
| Top Cover Design | Fixed or Removable Lid with manhole, view glass, and light provision |
| Agitator / Mixer Type | – Anchor Type Agitator- Propeller Type Agitator- Paddle / Turbine Agitator- Homogenizer / High Shear Mixer (optional)Driven by geared motor or variable frequency drive (VFD) |
| Agitation Speed | 10 – 60 RPM (Anchor) / 100 – 1500 RPM (Propeller & High Shear) – adjustable |
| Drive System | Helical geared motor / Worm gear motor / Direct drive with VFD control |
| Baffles | Stainless steel baffles provided inside tank for proper mixing and preventing vortex |
| Jacket Type (Optional) | Dimple jacket / Limpet coil jacket / Plain jacket for heating or cooling using steam, hot water, chilled water, or thermic fluid |
| Insulation (Optional) | Mineral wool / Rockwool insulation with SS cladding for heat retention |
| Operating Pressure | Atmospheric to 3 bar (higher on request) |
| Operating Temperature | Ambient to 120°C (with jacket) – higher ranges on customization |
| Nozzles & Fittings | – Inlet/Outlet connections (Tri-clover / Flanged / Screwed)- Sampling valve- Drain valve with zero hold-up design- Vent filter provision- Pressure gauge & safety valve (if pressurized)- CIP / SIP spray ball (optional) |
| Sealing Arrangement | Mechanical seal or stuffing box seal (depending on application) |
| Support Type | SS legs with adjustable ball feet / Castor wheels for mobility / Skid-mounted |
| Electrical & Control System | – Motor starter panel with ON/OFF, overload protection- VFD for speed variation- PLC/HMI based control with temperature, level, and pressure monitoring (optional) |
| Safety Features | Overload protection, emergency stop, safety valve, earthing lugs |
| Cleaning System | Manual cleaning or integrated CIP (Clean-in-Place) system with rotary spray ball |
| Compliance | cGMP, FDA, ASME, DIN, ISO standards |
| Applications | Pharmaceutical liquids, Syrup preparation, Suspension mixing, Chemical solutions, Food & beverage blending, Cosmetic formulations |
